Page 46 - Catalog spare parts BPW brake disc
P. 46
AUTO PARTS
Page 46 - Catalog spare parts BPW brake disc
Auto Parts / BPW-EL-TSB 31231601e Page 45
Hubs, hub bearings 4
Grease filling, bearing adjustment 4.6
ECO Plus hub system (ECO Plus Unit)
Grease filling per wheel hub ECO Plus hub system (ECO Plus Unit)
The ECO Plus hub system is designed for the use of longlife grease. On expiry of the guarantee, the roller bearings, the inside of the
hub and the seals are to be thoroughly cleaned (with diesel oil), dried, checked to see if they can be re-used; and re-greased every
three years when used off-road, or every 5 years when used on the road, within Europe (or every year when off-road and every two
years when on the road outside of Europe) (observe the current BPW maintenance instructions).
Apply BPW ECO-Assembly and Protection Spray as thin as possible and around the entire area of bearing seats of the axle stub.
BPW longlife roller bearing grease ECO-Li Plus ,
Quantity per tapered roller bearing
1 inner 2 outer
Axle load Axle type Roller bearings Quantity Roller bearings Quantity
SH.. 10 - 12t ECO Plus 170 g 120 g
10000 - 12000kg 33118 33213
SK.. 10 - 12t ECO Plus 130 g * 90 g *
1 Work BPW longlife roller bearing grease ECO-Li Plus thoroughly into the spaces between the
+ tapered rollers and the races. Apply remainder to outer races in the hub.
2 Apply a coat of BPW longlife roller bearing grease ECO-Li Plus all around the lip of the seal.
For other procedures see the current maintenance instructions.
* Greasing with grease spray (see page 42).
Bearing adjustment ECO Plus hub system (ECO Plus Unit)
1. Unscrew the hub cap.
2. Remove the hooked spring ring and retaining key from the axle nut.
3. Use a spanner to tighten the axle nut whilst at the same time turning the wheel hub, until the axle nut torque
limiter operates (do not use an impact driver).
4. Fit the retaining key in the groove between the axle stub and the nut (do not reset the axle nut).
5. Insert the hooked spring ring, depending on the version, behind the fl ange on the axle nut or in the
thread on the axle stub.
6. Screw on hub cap and tighten to 800 Nm.
BPW longlife roller bearing grease ECO-Li Plus Container BPW Code no.
0.4 kg Cartridge 02.1040.45.00
5 kg Bucket 02.1040.47.00
25 kg Bucket 02.1040.49.00
50 kg Drum 02.1040.50.00
BPW ECO-Assembly and Protection Spray 400 ml Can 02.3521.12.00
