Page 6 - Catalog fluids FEBI for cars and trucks

Auto Parts / Antifreeze Antifreeze

febi no. 01381 (red) febi no. 19400 (purple)
e.g. reference number G 012 A8D A1 e.g. reference number G 012 A8F A1

febi 01381 is a lifetime frost and corrosion febi 19400 is a silicate free long-life antifreeze for use in
protection for grey cast iron and full modern liquid-cooled combustion engines with replacement
aluminium engines, and meets the intervals of up to eight years. Due to its outstanding
requirements of VW, Audi, Seat and Škoda; characteristics, febi 19400 meets and exceeds
it features the following characteristics: the requirements of numerous manufacturers
and international standards.
· Frost protection down to -40 °C,
excellent protection against corrosion and · Provides excellent protection for
sedimentation. engines against corrosion and
· Raises the boiling point. This allows an cavitation.
even heat transfer. · Prevents sedimentation and foam
· Even a concentration of 33 % in the formation.
cooling system provides sufficient · Prevents damage to hoses and seals.
corrosion protection and additional frost · Can be mixed with silicate-free
protection down to -22 °C. antifreezes.
· Meets specifications of MB 325.3/ · Is equivalent to the VW antifreeze
MAN 324, Renault Type D/VW TL 774 D. “G12 plus” and can be mixed with
antifreezes G11 und G12.
Also available in a 1 litre bottle (febi no. 80325),
5 litre (febi no. 22272), 20 litre (febi no. 22274)
and 60 litre (febi Nr. 12710) barrels.
Characteristics Unit Test method
Density at 20 °C 1,116 g/cm³ DIN 51757
Flash point > 100 °C DIN 51758
Ignition temperature > 400 °C DIN 51794
Boiling point > 160 °C ISO 2592 Also available in 5 litre (febi no. 19402),
Viscosity at 20 °C < 15 mm²/s DIN 51562 20 litre (febi no. 22276) and 60 litre
(febi no. 22278) containers.
Total volume of the Required quantity in litres
cooling system Characteristics
Protection against frost · ASTM D3306 · ASTM D4985
to -20 °C to -25 °C to -30 °C to -35 °C · Ford ESE-M978B4H-A · GM 1899M
3 l 1,0 l 1,2 l 1,3 l 1,5 l · MB 325.3 · SAE J1034
4 l 1,4 l 1,6 l 1,8 l 2,0 l · ASTM D4340 · GM Saturn
5 l 1,7 l 2,0 l 2,2 l 2,5 l · GM 1825M · NATO S-759
6 l 2,0 l 2,4 l 2,7 l 3,0 l · VW-TL 774 F · NF R 15 601
7 l 2,4 l 2,8 l 3,1 l 3,5 l
8 l 2,7 l 3,2 l 3,5 l 4,0 l Characteristics Unit Test method
9 l 3,0 l 3,6 l 4,0 l 4,5 l Density at 20 °C 1,116 g/ml DIN 51757
10 l 3,4 l 4,0 l 4,4 l 5,0 l Boiling point > 170 °C ASTM D 1120
12 l 4,0 l 4,8 l 5,3 l 6,0 l Solidifying point 1:1 -38 °C ISO 3016
14 l 4,7 l 5,6 l 6,2 l 7,0 l Viscosity at 20 °C < 15 mm²/s DIN 51562
16 l 5,3 l 6,4 l 7,1 l 8,0 l
18 l 6,0 l 7,2 l 7,9 l 9,0 l Frost protection to Proportion of antifreeze Proportion of water
20 l 6,7 l 8,0 l 8,8 l 10,0 l -38 °C 50% 50%
15
15
14 15
14
14 / Auto Parts

(adsbygoogle = window.adsbygoogle || []).push({});