Page 27 - Catalog filters DONALDSON
P. 27
AUTO PARTS DONALDSON
Catalog production
Auto Parts / Shoptalk
AIR FILTRATION
™
Keep Those ECG Konepac Dust Dumpa Solves Dust
Air Cleaner Latches Inspected Expulsion Issues in High Dust
Environments
Ideally suited to equipment operating in mining,
construction and quarrying. The Dust Dumpa Filter Performance Alternatives
reduces maintenance and saves you time and
money.
• Improves dust evacuation from the air cleaner
• Clear tube allows for visual inspection of dust
collection. Operations can perform walk around air
cleaner inspection which saves time.
ECG style air cleaners have three cover latches that
• Improves safety of the air cleaner inspection process
need to perform correctly to ensure the element gasket
by eliminating the need for ladders or elevated
is sealing properly. These latches should be checked for platforms for daily inspections
tightness and wear. To check for tightness, close all three
• Keeps operators and maintenance personnel away
latches, then open and close them one at a time. There
from the nuisance dust normally encountered during
should be good tension and should snap tightly when air cleaner servicing operations.
closed. If any latches seem loose or rattle, they should be
• Improves vehicle up time by minimizing pre/post –shift Shoptalk
replaced.
air cleaner inspections, thus facilitating increased air
cleaner service intervals.
• Ships fully assembled
• Proper conversion requires drop down tube for every
dust cup
Dust Dumpa
The spring clip and pin repair kit is X009291
and fits all ECG style air cleaners. Filter Maintenance Kits
Part No. X006562 Part No. X006561
(includes dust cup seal)
When the Dust Dumpa kit (X006562) is installed on the dust cups
The most obvious place to check for wear is on the lower assembly of a Donaldson S Series air cleaner, the
the spring latch tip (the part that hooks into the rubber connector vibrates during normal vehicle operation and
notch on the filter cover). The tip may become gravity expels the pre-cleaned dust.
sharp and cut into the filter cover with extended
The Dust Dumpa kit, X006561 (without the dust cup), is an add
wear. The tip may also wear to the point where it
on to newer Donaldson air cleaners models including our Liquid Filtration Heads & Filters
will not hook onto the filter cover at all. If any of
®
PowerCore PSD 10" and 12" and SSG Series.
these conditions are evident, the latch should be
replaced.
For more information, see the intake accessories section of our
air cleaner catalog or contact your local Donaldson distributor.
Ref: Shoptalk Card F115246 Ref: Air Cleaner Catalog F110027
25 / Auto Parts