Page 84 - Catalog spare parts BPW HKN
P. 84
AUTO PARTS
Page 84 - Catalog spare parts BPW HKN
Auto Parts / Page 84 BPW-EL-HKN 31021701e
5 Hubs, hub bearings
5.3 Grease filling per wheel hub, bearing adjustment H.. / K.. / N..
5.3.3 ECO Plus hub system (ECO Plus Unit)
Grease filling per wheel hub ECO Plus hub system (ECO Plus Unit)
H
K
1 2
N
The ECO Plus hub system is designed for the use of longlife grease. On expiry of the guarantee, the roller bearings, the inside of the hub and the
seals are to be thoroughly cleaned (with diesel oil), dried, checked to see if they can be re-used; and regreased every three years when used
off-road, or every 5 years when used on the road, within Europe (or every year when off-road and every two years when on the road outside of
Europe) (observe the current BPW maintenance instructions).
Apply BPW ECO Protection Grease (via microflow brush) as thin as possible around the stub-axle bearing seats.
BPW longlife roller bearing grease ECO-Li Plus ,
quantity per tapered roller bearing
1 inner 2 outer
Axle load Axle type Roller bearing Quantity Roller bearing Quantity
H.. 8 - 12t ECO Plus 170 g 120 g
8000 - 12000kg 33118 33213
K.. 8 - 12t ECO Plus 130 g * 90 g *
1 Work BPW longlife roller bearing grease ECO-Li Plus thoroughly into the spaces between the
+ tapered rollers and the races. Apply remainder to outer races in the hub.
2 Renew the lip seal and smear contact area with BPW longlife roller bearing grease ECO-Li Plus .
* Greasing with grease spray see page 87.
Bearing adjustment ECO Plus hub system (ECO Plus Unit)
1. Unscrew the hub cap.
2. Remove the hooked spring ring with a wedge from the axle nut.
3. Use a spanner to tighten the axle nut whilst at the same time turning the wheel hub, until the axle nut torque
limiter operates (do not use an impact driver).
4. Fit the retaining key in the groove between the axle stub and the nut (do not reset the axle nut).
5. Insert the hooked spring ring, depending on the version, behind the flange on the axle nut or in the
thread on the axle stub.
6. Screw on hub cap and tighten to 800 Nm.
BPW longlife roller bearing grease ECO-Li Plus Container BPW Code no.
0.4 kg Cartridge 02.1040.45.00
5 kg Bucket 02.1040.47.00
25 kg Bucket 02.1040.49.00
50 kg Drum 02.1040.50.00
BPW ECO-Assembly and Protection Spray 400 ml Can 02.3521.12.00