Page 24 - Catalog spare parts BPW LUFT
P. 24
AUTO PARTS
Page 24 - Catalog spare parts BPW LUFT
Auto Parts / BPW-EL-Luft 31051601e Page 23
Spring seats, axle clamping 2
General
Determining axle mountings
Clarifying design O
Trailing arm width 70 mm or 100 mm
Axle cross section Ø 127 / 120 / 150 SL
Axle spring seat assembly clamped or welded
Round centring ring or square frame with
clamped axle mounting AL
Spring seats with centring ring
Shock absorber attachment:
Spring seats without shock absorber attachment
Spring seat with welded pin for shock
absorber mounting or spring seat for shock
absorber mounting
Trailing arm mounted from above or from below
Spring U-bolts or screws
U-bolt encloses axle beam or is positioned to the
side
Spring U-bolts or bolts fi tted from the top or bottom
Singe or double segments
Tracking plates
Weld tracking plates after installation and tracking of the
air suspension axles on the vehicle at the rear end of the
spring seats or spring plates - Weld a 4 x 80.
Do not weld the trailing arms !
Follow the welding guidelines given in the BPW
installation instructions!
Important for all welding work !
The trailing arms, air bags and plastic pipes
should be protected against sparks and weld
splashes during all welding work.
The earth terminal must not be attached to
the trailing arm or hub under any
circumstances.